8077 AC Main Only Toggle Circuit Breaker PanelFeatures: Red reverse polarity indicating LED Safety ground screw on panel back Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Specifications: Nominal Voltage: 120v AC...

Main + 8 Positions(1) 30A Double Pole Circuit Breaker(5) 15A Single Pole Circuit Breaker(1) 8247 AC Digital Multimeter w/ Alarm Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels...

120 Volt AC Main + 2 PositionsFeatures: All circuit label positions are backlit "ON" indicating LEDs installed in all circuit positions Includes 4206-Square Format Label Set Specifications: Positions: 2 Nominal Voltage: 120V AC Height: 4.75" (120.65mm) Width: 4.88" (123.95mm) Depth: 3.00" (76.2mm) Weight: 1.58lb...

Main + 20 Positions(14) 15A Single Pole Circuit Breakers(1) 100A C-Series Main Circuit Breaker(1) 8248 DC Digital Multimeter w/ AlarmWhite SwitchesFeatures: All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All...

8402 DC 10 Position with Multi-Function MeterFeatures: Voltage 12 VDC/24 VDC Amperage 100A All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to...

8086 AC 3 Sources +12 Positions/DC Main +19 Position Toggle Circuit Breaker Panel - White SwitchesFeatures: Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage...

8084 AC Main +6 Positions/DC Main +15 Positions Toggle Circuit Breaker Panel - White SwitchesFeatures: Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage: 100...

12V DC 4 PositionFeatures: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 4 Nominal Voltage: 12V DC Maximum Amperage*: 100A Height: 4.75" (120.65mm) Width: 4.88" (123.95mm) Depth:...

WeatherDeck™ Water Resistant Fuse PanelPN: 4302Color: GrayFeatures: Panel front rated IP67 when properly mounted with watertight mounting gasket IP67 – protected against immersion up to 1 meter for 30 minutes Designed for flybridge and open cockpit applications Independent label back lighting circuit for remote...

ELCI Main 30A Double Pole PanelFeatures: One 30A AC ELCI Main Residual Current Circuit Breaker, leakage trip amperate - 30 mA ELCI provides overcurrent and leakage protection per ABYC E-11 for whole boat shore power protection Red " Reverse Polarity" LED All circuit label...

AC Main +8 Positions / DC Main +29 PositionsPN:   8095White Switches Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage 100 Amperes DC 50 Amperes AC...

360 Panel Dual Bilge Pump ControlControls two bilge pumpsRestricted-off circuit breakers and manual override switches On-indicating LED indicates power is available at the bilge pump float switch Restricted-off circuit breakers provide 24-hour circuit protection to the bilge pump float switch Manual Override switch with...

C-Series Solar Charge Controller - 12 AmpsPV charge, lighting and load controllerThe C12 charge, lighting, or load controller is uniquely sophisticated. As a charge controller, it features three-stage charging, user definable voltage parameters, and automatic equalization.Standard in the C12’s load control circuitry are field...

8076 AC Main +11 Positions Toggle Circuit Breaker Panel - White SwitchesFeatures: Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed...

3116 - SMS Panel Enclosure with ELCI (30A) and 3 Blanks - 120VThe 3116 panel enclosure is built for Equipment Leakage Circuit Interrupters (ELCI) main circuit breakers and other large frame devices.  Meets ABYC E-11 when used with an ELCI Main circuit breaker and...

8082 DC 10 Position Toggle Branch Circuit Breaker Panel Features: All positive, negative and grounding buses installed, fully pre-wired Includes set of 30 common DC labels Label backlighting pre-installed All LEDs installed Detailed installation instructions and cutout template 8028, 8-16 Volt DC Micro Voltmeter 8041,...

DC 12V Socket PanelFeatures: 2 x 12 Volt sockets 15 Ampere maximum per socket Specifications: Height: 4.75" (120.65mm) Width: 4.88" (123.95mm) Depth:1.50" (38.1mm) Weight: 0.67lb (0.3kg) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of...

AC-II PanelEssential control and protection whenever AC from shore power or generators is on board. A double-pole master breaker with a power-on indicator light protects both the hot and neutral legs of the AC circuit. A reverse polarity light provides a clear warning when...

12 Volt DC 8 Position - HorizontalFeatures: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions: 8 Nominal Voltage: 12V DC Maximum Amperage*: 100A per bus Height: 4.75"...

Remote Control f/EVO Series Inverter/ChargersRemote Control for Inverter/Chargers EVO-2212, EVO-3012, EVO-2224, EVO-4024The EVO-RC is intelligent remote control designed specifically for use with NEW Samlex EvolutionTM Series of Inverter/Chargers.View real-time activity on the informative 32 character LDC screen while the unit is operating: Output voltage,...