Rear Panel Mount NMEA2000 Wired Micro 5-Pin - MalePanel mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.Waterproof seals ensure the integrity of the NMEA 2000 connection and bulkhead/panel.The female panel mount wired connector can...

RJ45 Waterproof Ethernet Connector for NDC-5RJ45 Field-Fit Ethernet connector.Allows for complete customization of Ethernet network cabling lengths, reducing cost, waste, and the overall weight of your boat.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with...

SeaTalkNG to NMEA2000 Adapter CableAdapter cable to convert SeaTalkNG data to NMEA2000.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Connection Gender: Female-Female Data Interface: NMEA 2000 Box Dimensions: 1"H...

Self-Contained Boat Network - Complete Network f/8 Devices w/Internal Terminators & Power FeedInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.The equivalent of eight T-pieces in a single case provides a significant...

Spare Shielded Cable for Connecting USB-2 to PCUSB cable accessory for use with the Actisense USG-2.*Note: The USG-2 ships with this cable included in the box, but it is also available as an accessory in case a replacement is needed.This product may not be...

Universal Strain Relief BracketThis strong stainless steel strain relief bracket ensures neat installation and tidy cables by securing any loose cables directly to the bulkhead.Perfect for the installation of the Actisense PRO-Range products; however, its smart design is ideal for any strain relief application.This...

USB to Serial Adapter for PRO Range & EMU-1 ProductsSerial to USB cable assembly.*Note: this accessory is only suitable for use with Actisense PRO range products. To safely transfer NMEA 0183 data to a PC from another manufacturer's device, the Actisense USG-2 is recommended.This...

USG-2 Isolated USB To Serial Gateway For Use w/NMEA0183, RS422 And RS232The USG-2 ensures safety and reliability when connecting a PC to your NMEA 0183 network.The USG-2 converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA...

Multi-WAN 7 Source Gigabit Router (Rackmountable) GB Ethernet 110/220VAC PowerAigean’s Multi-WAN routers enable networks to switch between multiple internet sources without adversely affecting the onboard local network. Coupled with advanced features such as failover and smart switching, a vessel’s connection to the internet is...

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555 Specifications: Type: Tools Box Dimensions:...

117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench 117WR-2 or 117WR-3 for...

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with: B164 SS164 SS264 Specifications: Type: Tools Box Dimensions: 1"H x 6"W x...

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264...

Low/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with...

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...