8077 AC Main Only Toggle Circuit Breaker PanelFeatures: Red reverse polarity indicating LED Safety ground screw on panel back Combines switching and circuit protection into a single device "Trip Free" design cannot be held "ON" during fault current condition Specifications: Nominal Voltage: 120v AC...

8121 - 5 Position Contura Switch Panel with Dual USB Chargers - 12/24V DC - BlackDesigned for open-cockpit and flybridge applications using switches to complement existing controls commonly used on many boats.Features: Includes 12/24V DC, 4.8A Dual USB chargers with intelligent device recognition that...

Main + 8 Positions(1) 30A Double Pole Circuit Breaker(5) 15A Single Pole Circuit Breaker(1) 8247 AC Digital Multimeter w/ Alarm Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels...

120 Volt AC Main + 2 PositionsFeatures: All circuit label positions are backlit "ON" indicating LEDs installed in all circuit positions Includes 4206-Square Format Label Set Specifications: Positions:t2 Nominal Voltage:t120V AC Height:t4.75" (120.65mm) Width:t4.88" (123.95mm) Depth:t3.00" (76.2mm) Weight:t1.58lb (0.72kg) Includes:(2) - 7403 - A-Series...

Aluminum Circuit Breaker Panel - 6 CircuitAluminum Breaker Panel features six 15A 12VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. 12VDC. Includes a sheet of...

360 Panel - 120V AC DUal OutletProvides a 360 Panel System platform for mounting equipment, switching, and monitoring functions.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other...

Main + 20 Positions(14) 15A Single Pole Circuit Breakers(1) 100A C-Series Main Circuit Breaker(1) 8248 DC Digital Multimeter w/ AlarmWhite SwitchesFeatures: All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All...

8402 DC 10 Position with Multi-Function MeterFeatures: Voltage 12 VDC/24 VDC Amperage 100A All positive, negative and grounding buses installed, fully pre-wired Panels with meters include toggle switch for mounting up to 3 battery banks All panels with analog meters are owner upgradable to...

8053 Slate Grey - 6 Position - VerticalFeatures: Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions Designed for flybridge and open cockpit applications ON-OFF Contura Switches ON indicating LEDs embedded in switches Watertight mounting...

8086 AC 3 Sources +12 Positions/DC Main +19 Position Toggle Circuit Breaker Panel - White SwitchesFeatures: Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage...

8084 AC Main +6 Positions/DC Main +15 Positions Toggle Circuit Breaker Panel - White SwitchesFeatures: Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage: 100...

12V DC 4 PositionFeatures: 4 to 32 branch circuits with installed 15 Ampere circuit breakers Available with voltmeters, ammeters, and digital multimeters Includes 4205-Square Format Label Set Specifications: Positions:t4 Nominal Voltage:t12V DC Maximum Amperage*:t100A Height:t4.75" (120.65mm) Width:t4.88" (123.95mm) Depth:t3.00" (76.2mm) Weight:t1.35lb (0.61kg) * Maximum...

WeatherDeck™ Water Resistant Fuse PanelPN: 4302Color: GrayFeatures: Panel front rated IP67 when properly mounted with watertight mounting gasket IP67 – protected against immersion up to 1 meter for 30 minutes Designed for flybridge and open cockpit applications Independent label back lighting circuit for remote...

ELCI Main 30A Double Pole PanelFeatures: One 30A AC ELCI Main Residual Current Circuit Breaker, leakage trip amperate - 30 mA ELCI provides overcurrent and leakage protection per ABYC E-11 for whole boat shore power protection Red " Reverse Polarity" LED All circuit label...

12 Position Switch CLB + Meter SquareFeatures: Available with voltmeters and ammeters Panels with meters include a toggle switch to monitor voltage on up to three battery banks Includes 4205-Square Format Label Set Specifications: Positions:t12 Nominal Voltage:t12V DC Maximum Amperage*:t120A Height:t7.75" (196.85mm) Width:t9.25" (234.95mm)...

AC Main +8 Positions / DC Main +29 PositionsPN:   8095White Switches Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wired Label backlighting pre-installed All LEDs installed Maximum panel Amperage 100 Amperes DC 50 Amperes AC...

360 Panel Dual Bilge Pump ControlControls two bilge pumpsRestricted-off circuit breakers and manual override switches On-indicating LED indicates power is available at the bilge pump float switch Restricted-off circuit breakers provide 24-hour circuit protection to the bilge pump float switch Manual Override switch with...

WeatherDeck® 12V DC Waterproof Switch Panel - 6 Position Integrated switch guards reduce the risk of accidental switching Panels can be mounted in four different orientations Panel front rated IP67 when properly mounted with watertight mounting gasket UV stabilized weather-resistant faceplate snaps on and...

C-Series Solar Charge Controller - 12 AmpsPV charge, lighting and load controllerThe C12 charge, lighting, or load controller is uniquely sophisticated. As a charge controller, it features three-stage charging, user definable voltage parameters, and automatic equalization.Standard in the C12’s load control circuitry are field...

8076 AC Main +11 Positions Toggle Circuit Breaker Panel - White SwitchesFeatures: Red reverse polarity indicating LED All hot, neutral and safety ground buses installed, fully pre-wired All circuit label positions are backlit on standard panels - No kit required "ON" indicating LEDs installed...