EV-100 Tiller Evolution AutopilotFeatures:
A complete autopilot-in-a-box
Evolution Ai for superior performance
No calibration required
Quick and easy installation
Powerful tiller drive is compact and unobtrusive
Used by the world's top single-handed sailors
For tiller steered boats up to 13,200 lbs (6,000 kg)
For 12V DC power systems
Includes p70s Autopilot Controller
Includes:
EV-1 Sensor Core
p70s Autopilot Control Head
ACU-100 Actuator Control Unit
Tiller Drive
Tiller Pin (sold in packages of 5)
Mounting Socket (sold in packages of 5)
Evolution Cabling Kit
EV Unit O-Ring Pack (set of 2)
Wall Mounting Bracket
The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.Features:
Precision monitoring of heading, pitch, roll, and yaw allowing the =autopilot to evolve instantly as sea conditions and vessel dynamics change
Flexible installation options
Mount above or below deck
Simple SeaTalkng connectivity to the control head and ACU
Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays
p70 Autopilot Control HeadThe p70 is a push-button operation controller designed primarily for sailboats.Features:
LightHouse user interface is simple and quick to use
Wide 160° viewing angles
Start up wizard helps you configure the pilot quickly and easily
Anti-reflective coating for improved visibility in bright sunlight
Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
Simple system and group dimming/illumination
Support for multiple data sources
SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)
ACU-100 Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Evolution Cabling Kit
1 x SeaTalkng Power Cable (0.4m)
1 x SeaTalkng Backbone Cable (5m)
1 x SeaTalkng Spur Cable (0.4m)
1 x SeaTalkng 5-way Connector Block
2 x SeaTalkng T-piece Connector
2 x SeaTalkng Terminator
Specifications:
Steering Type: Tiller
Box Dimensions: 12"H x 13"W x 31"L WT: 12.05 lbs
UPC: 723193774274
Quick Guide (pdf)Brochure (pdf)
SKU:
PM-48973
Availability:
1
In Stock
$1,799.99
$1,799.99
Unit price
/ per
Subtotal: $1,799.99
Share
Link copied to clipboard!
This item is a recurring or deferred purchase. By continuing, I agree to the cancellation policy and authorize you to charge my payment method at the prices, frequency and dates listed on this page until my order is fulfilled or I cancel, if permitted.
For tiller steered boats up to 13,200 lbs (6,000 kg)
For 12V DC power systems
Includes p70s Autopilot Controller
Includes:
EV-1 Sensor Core
p70s Autopilot Control Head
ACU-100 Actuator Control Unit
Tiller Drive
Tiller Pin (sold in packages of 5)
Mounting Socket (sold in packages of 5)
Evolution Cabling Kit
EV Unit O-Ring Pack (set of 2)
Wall Mounting Bracket
The EV Sensor Core
At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.
Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.
The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.
Features:
Precision monitoring of heading, pitch, roll, and yaw allowing the =autopilot to evolve instantly as sea conditions and vessel dynamics change
Flexible installation options
Mount above or below deck
Simple SeaTalkng connectivity to the control head and ACU
Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays
p70 Autopilot Control Head
The p70 is a push-button operation controller designed primarily for sailboats.
Features:
LightHouse user interface is simple and quick to use
Wide 160° viewing angles
Start up wizard helps you configure the pilot quickly and easily
Anti-reflective coating for improved visibility in bright sunlight
Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
Simple system and group dimming/illumination
Support for multiple data sources
SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required)
ACU-100 Autopilot Control Unit (ACU)
The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.
Lynx Shunt VE.Can (M10)Busbar Integrated Battery Monitoring The Lynx Shunt VE.Can contain a positive and negative busbar, a battery monitor, and a fuse holder for the main system fuse. It is part of the Lynx Distribution system. The Lynx Distributor has a power LED. The...
12V Chrome Plated Single Trumpet Mini Air HornThe Marinco FullBlast compressor driven air horns are the loudest and most complete line of 12V air horns available. All of our air horns produce sound levels ranging between 120 and 127dB, which means all of our...
ECHOMAP™ UHD2 54CV Chartplotter/Fishfinder Combo with US Coastal Maps & GT20-TM WHY TALK TO A LOCAL WHEN YOU CAN FISH LIKE ONE?They say locals know best. But anyone who says that hasn’t fished with the ECHOMAP UHD2 5” chartplotter with clear, crisp sonar and mapping....
MultiPlus 12/2000 80-50 120V VE.Bus UL ListedThe MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.Unique PowerAssist FeatureThe MultiPlus...
Digital Multi Control 200/200AThis panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is...
Current Transformer 100A:50mA for MultiPlus-II 1M/3.2' Wire EndThe Current Transformer 100A:50mA is designed for use with the Victron MultiPlus-II and MultiGrid-II to enable advanced energy features such as PowerControl, PowerAssist, and self-consumption optimization through external current sensing.By accurately measuring external currents, this transformer allows...
Current Transformer 100A:50mA for MultiPlus-II 5M/16.4'The Current Transformer 100A:50mA is designed for use with the Victron MultiPlus-II and MultiGrid-II to enable advanced energy features such as PowerControl, PowerAssist, and self-consumption optimization through external current sensing.By accurately measuring external currents, this transformer allows the system...
Current Transformer 100A:50mA for MultiPlus-II 20M/65.6'The Current Transformer 100A:50mA is designed for use with the Victron MultiPlus-II and MultiGrid-II to enable advanced energy features such as PowerControl, PowerAssist, and self-consumption optimization through external current sensing.By accurately measuring external currents, this transformer allows the system...
Lynx Shunt VE.Can (M10)Busbar Integrated Battery Monitoring The Lynx Shunt VE.Can contain a positive and negative busbar, a battery monitor, and a fuse holder for the main system fuse. It is part of the Lynx Distribution system. The Lynx Distributor has a power LED. The...
12V Chrome Plated Single Trumpet Mini Air HornThe Marinco FullBlast compressor driven air horns are the loudest and most complete line of 12V air horns available. All of our air horns produce sound levels ranging between 120 and 127dB, which means all of our...
ECHOMAP™ UHD2 54CV Chartplotter/Fishfinder Combo with US Coastal Maps & GT20-TM WHY TALK TO A LOCAL WHEN YOU CAN FISH LIKE ONE?They say locals know best. But anyone who says that hasn’t fished with the ECHOMAP UHD2 5” chartplotter with clear, crisp sonar and mapping....
MultiPlus 12/2000 80-50 120V VE.Bus UL ListedThe MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.Unique PowerAssist FeatureThe MultiPlus...
Digital Multi Control 200/200AThis panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is...
Current Transformer 100A:50mA for MultiPlus-II 1M/3.2' Wire EndThe Current Transformer 100A:50mA is designed for use with the Victron MultiPlus-II and MultiGrid-II to enable advanced energy features such as PowerControl, PowerAssist, and self-consumption optimization through external current sensing.By accurately measuring external currents, this transformer allows...
Current Transformer 100A:50mA for MultiPlus-II 5M/16.4'The Current Transformer 100A:50mA is designed for use with the Victron MultiPlus-II and MultiGrid-II to enable advanced energy features such as PowerControl, PowerAssist, and self-consumption optimization through external current sensing.By accurately measuring external currents, this transformer allows the system...
Current Transformer 100A:50mA for MultiPlus-II 20M/65.6'The Current Transformer 100A:50mA is designed for use with the Victron MultiPlus-II and MultiGrid-II to enable advanced energy features such as PowerControl, PowerAssist, and self-consumption optimization through external current sensing.By accurately measuring external currents, this transformer allows the system...