Garmin OnBoard Wireless MOB/Engine Cutoff System [010-02908-00]

OnBoard™ Wireless MOB/Engine Cutoff SystemTAG WHAT MATTERSBuilt so you can move freely and boat confidently, the Garmin OnBoard system uses wireless tags instead of traditional tethered cords — integrating with your compatible Garmin chartplotter. Tags are worn on the wrist, a carabiner, or a key ring float Tags are designated as either captain or passenger Set the MOB tag as captain to enable engine cutoff Temporarily unprotect tags with ease The GOS 10 hub includes a loud external alarm The tag battery life exceeds a season of typical use Captain TagCaptain MOB detection will trigger engine cutoff, a MOB waypoint on the chartplotter, and an audible alarm on the MFDs and hub.Wireless: No Strings AttachedThe wearable MOB tags are part of a wireless MOB system - letting you move untethered while still being monitored.Passenger TagPassenger MOB detection will trigger a MOB waypoint on MFDs plus an audible alarm on the MFDs and hub.Engine Cutoff SystemShould a captain tag trigger an MOB event, the system will cut power to the engines - letting the captain return to the vessel.Captain or Passenger TagsThrough the Garmin chartplotter interface, you can designate each tag as either captain or passenger — changing their MOB action.WaypointsWhen paired to your compatible Garmin chartplotter, a waypoint will be marked at the location where the MOB tag lost connection with the vessel.Audio AlarmThe GOS 10 hub includes a loud external alarm — alerting you to a MOB event.Pair Multiple TagsProvide peace of mind for up to 8 tags at a time.Vast CompatibilityThis product will work with any boat that has an engine cutoff switch. What's In The Box? GOS™ 10 Hub 12-pin fused power and engine cut-off harness with external buzzer External antenna for wireless connection to MOB tags NMEA 2000® tee and 6 ft drop cable White wireless MOB tag CR2032 coin cell battery White 20 mm quick-release band Carabiner with 20 mm quick-release attachment Floating foam keychain Installation hardware Documentation Specifications: General: Number of tags supported: 8 simultaneous passengers and captains User Interface: Compatible Garmin Chartplotter MOB Alarm: External beeper and MFD alert Engine cutoff: Yes View MOB details on MFD: Yes View tag status on MFD: yes (battery life, signal strength, protection status) Manage tags on MFD: yes (arm/disarm, captain/passenger) Wireless engine kill: Yes GOS™ 10: Dimensions (HxWxD): 91.55 mm x 155.12 mm x 48.47 mm Weight: 171.7 g Wireless range: 66 ft (up to 20 m) Supply voltage range: 10-32V Operating temperature range: -15 °C to 70 °C Typical power consumption: 50mA @ 12 V or 0.6 W NMEA 2000 LEN®: 1 Engine compatibility: Inboard, outboard, sterndrive from all major manufacturers Engine interface: Hardwired, in-line connection to ignition harness Number of engines supported: Up to 4 close-to-stop or 2 open-to-stop engines Water rating: IPX6 and IPX7 Compass-safe distance: 5 cm MOB Tag: Dimensions (HxWxD): 43.94 mm x 38.60 mm x 11.96 mm Weight: 21.5 g Wireless range: 66 ft (up to 20 m) Battery type: CR 2032 coin cell Battery life: > 1,200 hours of connected time View tag status on MFD: yes (battery life, signal strength, protection status) Water rating: IEC 60529 IPX8 (5 ATM) Attachment: Wrist strap or carabiner Owner's Manual (pdf)