Outboard Safety Cable Stainless Steel for Motor BracketFeatures: Braided, stainless steel cable, plastic coated for protection. For use with all outboard motor brackets to secure the motor to your boat. *All Panther 4-stroke brackets come with Panther safety cable.

Re-Arm Kit G 25G Manual 3/8" ThreadsRe-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 25-gram CO2 cylinder with 3/8" threads, a green pin, and step-by-step re-arming instructions. Make sure to check...

Re-Arm Kit S 38G Auto 1/2" ThreadsRe-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 1/2" threads, green pin, bobbin, and step-by-step re-arming instructions. Make sure to check...

Re-Arm Kit L 24gThe Auto/Manual 24G Inflatable Re-Arm Kit contains everything necessary to re-arm the Mustang Survival MIT 100 Convertible A/M inflatable PFDs after deployment. The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis. Use only Mustang Survival...

Conversion Plate for  CO Detectors - Black Optional conversion plate for mounting CMD6-M Carbon Monoxide Alarms in places where larger CMD2-M, CMD3-M, CMD4-M or CMD5-M units were previously installed.  This cover plate covers up unsightly wear or openings from previous installations.Mounting hardware included.*Sold as an...

HandHeld Electric Horn - BlueThe Hand Held Electric Horn features a weatherproof build and shock resistant construction. Meets all US Coast Guard requirements.Features: Solid state electronics Shock resistant construction Size: 7" high x 2.75" wide Meets US Coast Guard requirements Requires one 9-volt battery,...

Manual Discharge Cable Kit - 6'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by...

Gasoline & Propane Sensor OnlyThis sensor is a replacement for Fireboy-Xintex P systems. Installation: The sensor should be located by the propane-powered appliance, near the floor Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage Harsh chemicals should...

Rearming Kit for 33 Gram A/M All Clear VestsInflatable life jackets can be reused after each inflation but the CO2 cylinder needs to be replaced before using again.  Use an Onyx rearming kit to keep yours ready.  It is recommended to purchase an extra...

HydroFix™ Hydrostatic Release Unit (HRU)The HydroFix™ Hydrostatic Release Unit (HRU) is a patented rod system that allows a beacon to be quickly and reliably released from a Category I bracket when submerged in water between  4.9' to 13.1' (1.5 to 4 M.)   Does...

Manual Discharge Cable Kit - 10'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by...

30" Ring Buoy with Reflective Tape Mustang Survival's life ring buoys are designed for superior life expectancy in the harshest environments.Molded from high-impact linear, low-density polyethylene (LDPE), Mustang Survival's life rings are designed for superior life expectancy in the harshest environments.Mustang Survival's Ring Buoy...

Re-Arm Kit H 17g - Automatic/ManualThe only thing worse than premature inflation?  One that doesn’t inflate at all. Keep your inflatables ready to pop at any time with fresh cartridges on hand.  The Auto/Manual 16g Bayonet Inflatable Re-Arm Kit contains everything necessary to re-arm your...

Re-Arm Kit E 33g - Automatic/Manual The 1F Automatic and 3F Manual Inflatable PFD Re-Arm Kit E, contains everything necessary to re-arm your inflatable after deployment.  The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis.  Note - This re-arm...

Belt Pack Re-Arm Kit ZS 16GUnlike traditional life jackets, inflatable belt packs are worn around the waist and deployed when needed, making them a practical option for those who prioritize both safety and mobility on the water. Whether paddling on a serene lake or...

Belt Pack Re-Arm Kit ZR 16G Manual 3/8" ThreadUnlike traditional life jackets, inflatable belt packs are worn around the waist and deployed when needed, making them a practical option for those who prioritize both safety and mobility on the water. Whether paddling on a...

Bailer Throw Bag - 50' Rope With reflective details and a built-in bailer, this compact and aerodynamic throw bag is a necessity in any boat.Ready to toss to a swimmer, the .25" wide rope is 50' long with a tensile strength of 1,200 lbs.  Designed...

Water Helmet - L/XL - WhiteThis helmet is for lightweight and comfortable protection. The Rachet system and chin cup provide a secure fit, and the helmet can be fitted with flashlight or motion camera adapters.Features: Hi-impact ABS shell Accessory side rails and NVG/Go Pro...

Manual Discharge Cable Kit - 28'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by...

Replacement Mount for rescueME EPIRBs Ocean Signal's replacement mount.Compatible With: rescueME EPIRB 1 rescueME EPIRB 3 *Sold as an Individual  Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 10"L WT: 0.15 lbs UPC: 5060266110702