Bullet/SplitShot Transom Mount BracketTransom mount bracket for Bullet & SplitShot Transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 7"L WT: 0.21 lbs UPC: 9420024168370

Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 4"W x 9"L WT: 0.25 lbs UPC: 042194535944

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...

ActiveTarget™ Forward/Down Mounting KitAttach an ActiveTarget transducer to your trolling motor with the Trolling Motor Forward/Down Mount for Forward and Down views at the trolling motor. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.3 lbs UPC: 9420064118243

Mix & Match Cable for Raymarine 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an...

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...

Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Humminbird.Features: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters...

Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & TempThis replacement Transducer Bracket is for the plastic transom mount that can be used to replace the dual frequency transducers included with many Garmin units.WARNING: This product can expose you to chemicals which...

TripleShot Transom Mount BracketTransom mount bracket for TripleShot Transducer Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 7"L WT: 0.25 lbs UPC: 9420024168387

Extension Cable for Bullet Transducer - 10'Transducer Extension Cable for Hook2 Bullet Skimmer Transducer, 10 ft. length. Specifications: Type: Extension Box Dimensions: 2"H x 7"W x 10"L WT: 0.45 lbs UPC: 9420024171806 Owner's Manual (pdf)

HS-WS-SS Mounting KitMounting kit for transom mount 83/200 kHz skimmer transducers Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 042194504995

Heavy-Duty Transom Mount Bracket w/Spray ShieldMount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel with the...

Transducer Extension CableUse this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit.Compatible Devices: echo™ 100 echo™ 150 echo™ 200 echo™ 300c echo™ 500c echo™ 550c WARNING: This product can expose you to chemicals which are known to the State...

Transducer Spray ShieldGarmin's transducer spray shield is available for Garmin side scanning transducers.Mounting hardware included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to...

RealVision 3D Transducer Extension Cable - 3M (10')RealVision 3D Transducer Extension Cables work with both the transom-mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end and a compatible socket at...

Trolling Motor Mount f/GT36 and GT56 Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x...

CPT-DV/CPT-DVS Mounting KitTransom Mount Bracket for CPT-DV & CPT-DVS Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 6"W x 8"L WT: 0.2 lbs UPC: 723193795842

Foulfree Transducer Coating Formulated by industry-leading scientists and certified by Airmar for transducers.   Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also increase the turbulence over the face of the transducer causing aeration...

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter...