XSONIC Transducer Adapter Cable to HOOK²Adapter cable to connect XSONIC Transducer to HOOK² Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.21 lbs UPC: 9420024166963

Kayak Scupper Transducer MountLowrance's transducer mounting systems for sit-on-top fishing kayaks. The Transducer Kayak Scupper Mount is perfect for all HDS, Elite, Mark and X-Series Lowrance Skimmer transducers, both 83/200 kHz and 455/800 kHz DownScan Imaging (DSI) models alike, as well as earlier 1-inch...

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in...

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...

Forward-Facing Motorized Sonar MountThe FORESIGHT Forward-Facing Sonar Mount is the most sophisticated mounting system on the market. It allows the sonar transducer to stow and deploy with the bow-mount trolling motor but still be controlled independently.*The FORESIGHT was designed to be used with a...

TotalScan/StructureScan 3D Replacement BracketReplacement bracket for TotalScan & StructureScan 3D Transom Mount TransducersHardware included Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 13"L WT: 0.8 lbs UPC: 9420024157183

Adapter cable, 7 pin BLUE to bare wires Specifications: Type: Adapters Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 042194535111

Transducer Mounting PlateFeatures: Marine-grade polymer plate will not warp or corrode Premium materials; unaffected by UV rays Mounts easily with only 2 screws All hardware included

MHX XNPT Portable Hardware KitMounting hardware and suction cup for portable XNT transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go...

Adapter 7-Pin Blue Transducer to a 9-Pin Black UnitFeatures: Connects legacy 7-Pin Blue Transducer to a 9-Pin Black Unit Sonic Connector Transducer Adapter Cable Compatible With: HDS Gen3 Elite-Ti Series NSS evo2 GO XSE Series SonarHub™ Specifications: Type: Adapters Box Dimensions: 2"H x 6"W...

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to the State of California...

9-Pin Black to 7-Pin Blue Adapter Cable f/XID TransducersThe 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.Use with Airmar Chirp transducers Specifications: Type: Adapters Box Dimensions: 2"H x 4"W x 7"L WT: 0.24 lbs UPC: 9420024165355

Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless steel mount.

HDI Trolling Motor XDCR Adapter CupFor using HDI 83/200 and 455/800 kHz XDCR on a trolling motor Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 8"L WT: 0.37 lbs UPC: 9420024121924

Extension Cable for HOOK² TripleShot/SplitShot Transducer - 10'10' extension cable for connecting TripleShot/SplitShot Transducers to HOOK² Specifications: Type: Extension Box Dimensions: 2"H x 3"W x 6"L WT: 0.45 lbs UPC: 9420024171813

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a...

ActiveTarget™ 10' Extension CableThis extension is compatible with Lowrance ActiveTarget™.Features:10 ft. cable Specifications: Type: Cables Box Dimensions: 3"H x 6"W x 8"L WT: 1.15 lbs UPC: 9420064130436

xSonic Pigtail Wiring Block AdapterConnect transducer with NO connector to echo sounder requiring a 9-Pin connector. Specifications: Type: Adapters Box Dimensions: 4"H x 6"W x 8"L WT: 1.21 lbs UPC: 9420024154618

MHX MXNT Transom Mount Hardware f/MEGA TransducerStainless Steel mounting hardware for the XNT transom mount transducers.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more...