J2K100 NMEA 2000® / J1939 Bridge (Engine/Transmission/Genset Gateway)Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital interface. Critical engine, transmission, and genset data is then distributed throughout the...

NMEA 2000 Starter Kit - Single UnitFrom boat performance to weather and water conditions, make sense of it all with NMEA 2000 networking on your Humminbird control head. The NMEA 2000 Starter Kit - Single provides the essential components to build a single device...

NavLink 2 “NavLink 2 is an easy to fit NMEA 2000 to Wifi server designed to make NMEA 2000 navigation data available for apps on smartphones, tablets, iPads and PCs.” Features:NavLink 2 is an easy to fit NMEA 2000 to Wifi server designed so that...

NMEA 2000 Single Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a single device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each) item# 270105 and 270106 One single tee connector,...

N2KEXT-15RD 15' NMEA 2000 Cable15' NMEA 2000 Cable Specifications: Data Interface: NMEA 2000 Connection Gender: Male-Female Cable Length (Meters): 4.5m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs UPC: 042194529745

NMEA 2000 Two Way Tee ConnectorAncor's NMEA 2000 Approved Tee Connectors offer connection between NMEA 2000 drop cables and backbone cables. The yellow couplers connect to the corresponding Ancor tees and backbone cables, creating a simplified, color coded network installation. The connectors are offered...

NMEA 2000 Dual Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a dual device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each), item# 270105 and 270106 One dual tee connector,...

NMEA 2000 Four Way Tee ConnectorAncor's NMEA 2000 Approved Tee Connectors offer connection between NMEA 2000 drop cables and backbone cables. The yellow couplers connect to the corresponding Ancor tees and backbone cables, creating a simplified, color coded network installation. The connectors are offered...

NMEA 2000® T-Connector - 10-PackAdd components to your NMEA 2000 network by installing our T-connector on your backbone cable. The revised version of this T-connector is offset by 45 degrees compared to the previous version. WARNING: This product can expose you to chemicals which...

NMEA 2000 Power Cable With Tee - 1MAncor's NMEA 2000 Approved Power Cable with Tee allows for power connection to an NMEA 2000 network quickly and easily. The tee is color coded red to make identifying the power cable easy once installed as part...

NMEA 2000 Power Isolator Ancor's NMEA 2000 Power Isolator can be used for isolating power between 2 independent NMEA 2000 networks. Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues...

NMEA 2000 Single Tee ConnectorAncor's NMEA 2000 Approved Tee Connectors offer connection between NMEA 2000 drop cables and backbone cables. The yellow couplers connect to the corresponding Ancor tees and backbone cables, creating a simplified, color coded network installation. The connectors are offered in...

Network Bus ExtenderPart #: NBE100-01Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum node count, network trunk length and cumulative drop length of any NMEA 2000 network. The NBE100 solves bus errors and other electrical issues caused by exceeding any of these...

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone...

GPS200 - NMEA 2000 GPS Antenna/ReceiverMaretron's GPS200 provides reliable position fixes 10 times per second, accurate boat speed four times per second, and precision time once per second. The GPS200 antenna/receiver is a plug-and-play device that is fully compliant and certified to the NMEA...

NavLINK Blue NMEA 2000 to Bluetooth GatewayFeatures: NMEA 2000 to Bluetooth Gateway bringing NMEA 2000 connectivity to BT sensors plus phones, tablets, and PCs DY SDK available for quick deployment of BT connectivity Wireless set up of device via browser interface for easy interfacing...

ST-Ng to DeviceNet MaleSeaTalkng backbone cable to DeviceNet (Male) - 400mm

GPS160 TriNav Sensor with NMEA 0183 OutputThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed...

ST-Ng to DeviceNet FemaleSeaTalkng backbone cable to DeviceNet (Female) - 400mm

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The...