32mm Towable Genoa Car 2:1 PurchaseBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactured from high-grade aluminum with our unique Spectro anodized finish for superior protection in marine environments. A black anodized...

4mm Dyneema Loop with High Load Eye - 12mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail...

4mm Rope Stoppers - Black - PairRope Stoppers can also be referred to as parrel beads, tie balls, halyard stoppers, or stopper balls, and are primarily used in rope management.At the end of a line, Rope Stoppers serves as an easy-to-grab end knob, can...

7mm Dyneema Loop with High Load Eye - 22mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks, and toe rail...

Aluminium 10" Winch HandleThe aluminium winch handles are designed to fit International Star sockets found in all makes of winch and standard deck filler caps.Light-duty and inexpensive, they come in two popular sizes. Each handle features a silver anodised profiled bar with an integral...

Aluminium 8" Winch HandleThe aluminium winch handles are designed to fit International Star sockets found in all makes of winch and standard deck filler caps.Light-duty and inexpensive, they come in two popular sizes. Each handle features a silver anodised profiled bar with an integral...

Boomstrut - Black for Boats 20-25'Boomstrut 44021 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the...

Boomstrut - Black for Boats 25-30'Boomstrut 44031 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom...

Boomstrut - Black for Boats 30-35'Boomstrut 44036 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to...

Boomstrut - Black for Boats Up To 20'Boomstrut 44011 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom...

Boomstrut - Silver/White for Boats 20-25'oomstrut 44020 is designed for boats 6m-7.5m (20ft -25ft) in length with a maximum boom tip weight of 9.5kg (21 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the...

Boomstrut - Silver/White for Boats 25-30'Boomstrut 44030 is designed for boats 7.5m – 9m (25ft – 30ft) in length with a maximum boom tip weight of 15kg (33 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom...

Boomstrut - Silver/White for Boats 30-35'Boomstrut 44035 is designed for boats 9m – 10.5m (30ft- 35ft) in length with a maximum boom tip weight of 19kg (42 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to...

BPG-50 Bulkhead Pipe Gland 50mm ODThe Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The required hole cutter is 60mm. It has 4 M6 fasteners supplied.These glands give a water and vapor-proof seal between bulkheads....

BPI-20 Bulkhead Pipe Gland Reducer 20mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 18.5 and 20mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-25 Bulkhead Pipe Gland Reducer 25mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 22.5 and 25mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

BPI-32 Bulkhead Pipe Gland Reducer 32mm for BPG-50This adaptor enables smaller pipes to be used in conjunction with the BPG-50 Pipe Gland. This will accept pipes between 28 and 32mm.These glands give a water and vapor-proof seal between bulkheads. They are flexible and will...

Compact Winch Handle MountThis low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Compact Winch Handle Mount 21055. This low-profile, anti-snag mount gives you a handy yet unobtrusive place to store your winch handle.Features: Low profile For all locking...

Continuous Line FurlerDesigned for optimum performance in the most demanding of conditions, the HBT1 hybrid-bearing technology combines high specification, solid-state, and Torlon ball bearings, which ensures the furling wheel remains balanced and spins freely, even under the highest loads.With a safe working load of...

Deck Eye - Stainless Steel - 14mmStainless steel deck eyes with generous eye capacity.Specifications: Stainless Steel Deck Eye Single 14mm Height x 14mm Width x 5mm Fastenings