Chrysler Female Hose Fitting - 3/8" BarbThis Attwood Chrysler Engine Fuel Hose Fitting provides for the precise and effective installation of a fuel line to a Chrysler-brand engine. This Fuel Hose Fitting is a female fitting that connects to the engine end of the...

Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.Features:...

Marine Fuel Pump Assembly for Volvo Penta: 4.3L Through 5.7G1 EnginesFuel Pump Assembly for Volvo Penta: 4.3L through 5.7G1 engines.Engine Brand:Volvo PentaFitment: 4.3L  4.3GXi 4.3OSi 5.0L 5.0GXi 5.0OSi 5.7L 5.7OSXi 5.7Gi Brochure (pdf)

Rotor for Mercruiser: 2001 & Newer MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L MPI Engines with ECM 555Rotor for Mercruiser: 2001 & Newer MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L MPI Engines with ECM 555.Engine Brand:Mercury / MercruiserFitment:2001 & Newer MCM/MIE 4.3L, 5.0L, 5.7L & 6.2L...

3" x 36" Blue Silicone Wet Exhaust HoseTrident Silicone Marine Wet Exhaust Hose gives the best performance with a cool quiet elegance. Silicone naturally handles higher temperatures and will last longer than rubber exhaust hoses. The silicone will also transfer less heat into the...

Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel...

Premium Replacement Tilt Trim Motor for Late Model Mercruisers with Oildyne PumpReplacement outboard tilt trim motor that will fit late model Mercruiser w/Oildyne pump, Ring Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features:...

Original Equipment Quality Replacement Solenoid for BRP-OMC & Evinrude E-TECReplacement solenoid that will fit BRP-OMC, EVINRUDE E-TEC, 2010-UP 15 HP-300 HP.Replaces:BRP-OMC 587020*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer...

Premium Replacement Alternator with 65mm Multi-Groove Pulley - 12V 70AReplacement alternator that will fit Mercruiser 4.3L - 8.2L, 1998-Up, 12 Volt, 70 AMP, Internal Fan, 65-mm multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured...

Zeus A275L J180 4" Alternator with Isolated Ground & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Heat shedding...

Replacement Outboard Tilt Trim Motor - Honda/Suzuki - 4 Bolt MountQuality Assurance: Epoxy Powder coated for maximum corrosion protection Motor shafts induction case hardened at bearing surfaces for superior wear resistance Precision Testing: All armatures tested to withstand 50 times operation voltage (12V) All...

Alternator 170 AMP Kit 12V 3.15" Dual Foot Saddle J10 Pulley Regulator & Temp SensorKit Includes: XT-DF-170-J10 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 170A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar,...

Mercury Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Solid machined brass for dependable performance, peace of mind Quick-connect...

Marine Fuel Pump for Mercury Low Pressure 4.3 LH, LX, LXHFuel Pump Assembly for Mercruiser engines: MCM 262 Mag EFI, 4.3L/LX & 4.3LH/LXHEngine Brand:MercruiserFitment: MCM 262 Mag EFI, 4.3L/LX & 4.3LH/LXH

Ignition Module for Mercruiser Engines: 4 Cyl., V-6 & V-8 Engines with Delco HEI IgnitionIgnition Module for Mercruiser Engines: 4 Cylinder, V-6 & V-8 Engines with Delco HEI Ignition.Engine Brand:Mercury / MercruiserFitment:GM 4 Cyl., V-6 & V-8 Engines with Delco HEI Ignition Brochure (pdf)

Distributor Cap for GM V6 Engines with Thunderbolt IV & V HEI IgnitionsDistributor Cap for GM V6 Engines with Thunderbolt IV & V HEI Ignitions.Engine Brand: Mercury / Mercruiser OMC Fitment:GM V-6 Engines with Thunderbolt IV & V HEI Ignitions Brochure (pdf)

Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not...

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features: Johnson, Evinrude, and OMC fitting Tank...

Distributor Cap for GM V-8 Engines with Thunderbolt IV & V HEI IgnitionsDistributor Cap for GM V-8 Engines with Thunderbolt IV and V HEI Ignitions.Engine Brand: Mercury / Mercruiser OMC Fitment:GM V-8 Engines with Thunderbolt IV & V HEI Ignitions Brochure (pdf)

Temperature Sensor for Mercruiser & Volvo Penta EnginesTemperature Sensor for Mercruiser and Volvo Penta Engines.Engine Brand: Mercury / Mercruiser OMC Volvo Penta Fitment:Mercruiser, OMC, and Volvo Penta Engine Brochure (pdf)