Mercury Female Hose Tank Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the durable Acetal construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Easy installation with barbed fittings for 3/8 inch I.D....

Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter...

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer)This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel...

Mercury Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Solid machined brass for dependable performance, peace of mind Quick-connect...

Mercury/Yamaha Female Hose Engine Fitting - 3/8" BarbConnect your tank and fuel lines with confidence; the solid machined-brass construction holds up to leaded, unleaded, and alcohol-based fuels for.Features: Solid machined brass for dependable performance, peace of mind Hose female  Tank or Engine End Replaces...

Mooring Fender Lock Kit - Stainless Steel PairStainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the...

Mooring Snubber Kit with 3/8" x 20' Dock LineThis flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing the amount...

Motor Well Boot for 4 (inch) Diameter OpeningThe motor well boot provides an organized, covered pass-thru for control cables, wires, or fuel lines. The split side allows for installation without disconnecting controls.Features: Sold as a single pack that contains two Motor Well Boots Includes...

Neat Cleat Stainless Steel - 6"A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot...

Outboard Fuel Filter - UniversalDisposable high-flow in-line fuel filters work with most outboard motors. Protects carbureted engines by trapping pollutants. A clear body allows visual inspection.Features: A clear body allows visual inspection, making it easier to stay on top of maintenance High-strength, impact-resistant, and...

Outboard Fuel Filter for 3/8 inch LinesProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.Features:  Use with 3/8 inch fuel lines Works with most outboard motors A clear body...

Marine 12-Volt Power Outlet Marine quality 12-volt outlet Designed to for replacing or adding outlets in your boat RV or camper Surface mount WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects...

Oval 2-Pin Base f/Angled Pole - BlackPart #: 91022-7These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when...

Paddle ClipsAttwood's Paddle Clips keep your paddle secure to your boat for freeing up both hands or resting from paddling and fits 1" diameter shafts.Features: Fits paddles 1" diameter Color: Black Set of 2 Comes with stainless steel mounting hardware

PaddleSport Portable Navigation Light Kit - C-Clamp, Screw Down or Adhesive Pad - GrayBe seen and be safe with these compact and portable LED navigation lights. Portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal...

PaddleSport Portable Navigation Light Kit - C-Clamp, Screw Down or Adhesive Pad - RealTree® Max-4 CamoBe seen and be safe with these compact and portable LED navigation lights. Portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole...

PaddleSport Portable Navigation Light Kit - Screw Down or Adhesive Pad - GrayBe seen and be safe with these compact and portable LED navigation lights. Portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations. Ideal forpersonal...

PaddleSport Portable Navigation Light Kit - Screw Down or Adhesive Pad - RealTree® Max-4 CamoBe seen and be safe with these compact and portable LED navigation lights. Portable navigation lights are more durable, easier to use, and include Attwood's strongest mounting and pole configurations....

Plastic Thru-Hull Fitting - 1-1/2" - WhiteThese thru-hulls are made with a durable, thermoplastic construction which prevents electrolysis.Caution: Thru-Hull connectors are designed for installation above the water line only.Specifications: Fits Hose Size: 1-1/2" I.D. Stem Length: 3-1/2" Max. Hull Thickness: 1-1/4" Flange Diameter: 3"...

Pole Light Storage Clips New design holds larger (3/4") diameter anti-glare pole lights.  Resilient rubber clip holds standard 3/4"-diameter poles. Ideal for storing and protecting plug-in pole lights when mounted in engine wells or lockers. Installs with one #8 fastener.OEM Part Number 7571-1*Sold as a PairWARNING: This...